Baby Mode Child Restraint Car Seat Hiring Services
We have purpose built our NEW In-Door Car Seat Service Centre Workshop within our Melbourne Superstore located at 5/77 Wright Street Sunshine VIC 3020. All Car Seat Hire Services are provided with full safety in mind and not conducted in busy Car Parks as traditionally the case with other providers. Our service centre provides all of our premium services, all in one convenient location for you - including Car Seat Hire, Car Seat Fitting and Car Seat Cleaning.
Our professional fitters will install your Baby Car Seat Hire in accordance with all Manufacturers recommendations and all products pass Australian Standard AS/NZS1754. We guarantee all hire products are less than 3 years old. Most hire centres retain their hire models for 6 years. Our current fleet are 2021 inventory by the leading Manufacturers in the industry and will be removed from hire within 3 years, ensuring you always have the safest up to date HIRE.
Type of child restraints we hire are:
Baby Capsules
Convertible Car Seats
Forward Facing Car Seats
Booster Seats
Cost of Hire
HIRE & INSTALLATION OF ONE BABY CAR SEAT ( Capsule, Car Seat or Booster) FROM $49
Online booking essential. Subject to availability. 1 Week to 4 Month Options Available
Easy Affordable Extended Rental FROM ONLY $1 PER DAY…
Important Points to Remember
POINT 1
If we are installing a car seat or capsule in the newborn rear-facing position, it’s a good idea if you could place 2-3 bath towels in the car for us in case we need them. The reason for this is that your vehicle’s rear car seat may not provide the angle that the Safety Seat needs to be positioned for the baby. With a towel we could, if necessary, create a seat angle that will comply with the products instructions. This is only in case we have an angle or contour issue, every vehicle is different. We also recommend the use of Car Seat Protectors to ensure the car seat does not severely damage your vehicle’s car seat, these can be purchased at the time of installation if you require.
POINT 2
When fitting the car seat into your vehicle there may be additional accessories (like extension straps, locking clips, anchor bolts etc.) that may be required. This is fully dependent on your vehicle’s back seat structure and also where your vehicle’s anchor points are located. If these accessories are required they can be purchased at the time of installation. VIEW Car Seat Accessories
POINT 3
When installing requires Baby Mode to reposition a seat from rear facing to forward facing or when installing a forward facing car seat for Children 15 months or younger. It is necessary (for your child's safety) that you have your child present to make sure that the new seat positioning is compliant to your child’s requirements. If your child is not going to be available during the installation process then prior knowledge of the child’s size may be necessary to configure the unit prior to installation taking place. This can be done easily using a simple measurement of junior before you come down for the installation. All that is required is to just sit junior on the floor and measure from the floor up to their shoulder height and bring that measurement with you to the appointment. For a child to be able to be placed in the forward facing position they are required to meet the lower height marker of their seat. This may save you time and money, as if this information is not on hand the fitter may refuse to reposition or install the seat.
POINT 4
When completing your booking online, please ensure you supply your mobile phone contact number & email address. This allows our Car Seat Service Centre Team the ability to contact you prior to your book appointment time, should we need additional information regarding your car seat or child.